Latest News

Residential

Safe & healthy comfort for your home...

Learn more

Sheds

The perfect Insulation for Sheds and Garages...

Learn more

Architects

Widely recognised by architects & designers...

Learn more

Construction

Ideal for Building and Construction Professionals...

Learn more

Print
PDF

Walls Installation

Metal and Timber Walls

  1. Roll out Green Insulation™ horizontally on the outside of studs or framing.
  2. Install Green Insulation™ from the bottom of stud or framing.
  3. Roll out the next roll of Green Insulation™ allowing 150mm overlap (residential building) or 50mm overlap (commercial building).
  4. Where overlap is less than 50mm or 150mm (see note 3), use 75 mm wide reinforced aluminium foil joining tape (available from Green Insulation™).
  5. Allow a nominal air space of 25 mm either side of the Green Insulation™ to achieve required R-values. This is easily achievable by pushing Green Insulation™ inwards between the studs.

Double Brick Cavity Wall

  1. Construct internal brick wall with wire ties in place.
  2. Install Green Insulation™ from bottom of the wall.
  3. Roll out Green Insulation™ horizontally across the wall on top of wire ties
  4. Slit Green Insulation™ with sharp knife or push wire tires through Green Insulation™.
  5. Overlap installed Green Insulation™ by 150mm (residential building) or 50mm (commercial building).
  6. Where overlap is less than 50mm or 150mm (see note 5), use 75 mm wide reinforced aluminium joining tape (available from Green Insulation™).
  7. Allow a nominal air space of 25 mm either side of the Green Insulation™ to achieve required R-values. This is easily achievable by pushing Green Insulation™ inwards between the brick cavity.
Note:
  1. Higher R-values can be achieved by increasing the air space between Green Insulation™ and inner and outer wall.
  2. To achieve the required R-values, ensure the Green Insulation™ is centered in the cavity between the brickwork.

Metal and Timber Wall | Click here to download installation sheet

Double Brick Wall | Click here to download installation sheet

Green Insulation offer a range of support services for their foil insulation products. Should you need support, please contact us. PH. (07) 3200 6522

Green Insulation operate 8:30am to 5pm Monday to Friday E.S.T. excluding public holidays.

Free Engineer support. Whether you are specifying reflective foil insulation or you need other technical advice, please contact us:  This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it

For the best customer support in the industry, please contact us!This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Photo Gallery

Gallery

Contact Us

Unit 1/13 Meakin Road, Meadowbrook Qld 4131

Phone:+ 61 (0)7  3200 6522
Fax: + 61 (0)7 3200 6599
Map: View Google Map
Email us: contact@greeninsulation.com.au